| Alloy | Cu | Si | Mg | Zn | Fe | Mn | Ni | Sn | Pb | Ti | Al |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ADC12 | 1.5 to 3.5 | 9.6 to 12.0 | 0.3 max | 1.0 max | 1.3 max | 0.5 max | 0.5 max | 0.2 max | 0.20 max | 0.30 max | Balance |
| ADC12Z | 1.5 to 3.5 | 9.6 to 12.0 | 0.3 max | 3.0 max | 1.3 max | 0.5 max | 0.5 max | 0.2 max | 0.20 max | 0.30 max | Balance |
| LM6 | 0.1 max | 10.0 to 13.0 | 0.1 max | 0.1 max | 0.1 max | 0.5 max | 0.1 max | 0.05 max | 0.1 max | 0.20 max | Balance |
| LM24 | 3.0 to 4.0 | 7.5 to 9.5 | 0.30 max | 3.0 max | 1.30 max | 0.5 max | 0.4 max | 0.20 max | 0.3 max | 0.20 max | Balance |
| AK5M2 | 1.5 to 3.5 | 4 to 6 | 0.2 to 0.8 | 1.5 max | 1.30 max | 0.2-0.8 | 0.5 max | 0.05-0.2 | Balance |
Raw aluminium is combined with alloying elements (Cu, Mg, Zn, etc.) in electric or gas-fired furnaces.
Inert gases are used to remove hydrogen and oxides from the melt, improving material integrity.
Molten metal is cast into billets or directly extruded into profiles, sheets, or rods.
Tempers such as T4, T6, and O are applied based on required mechanical properties.
Products are machined, coated, or anodized and then inspected for dimensions and composition.
Store aluminium alloys in a dry, enclosed area, preferably on wooden pallets to prevent galvanic corrosion. Avoid exposure to moisture and corrosive chemicals. Use non-sparking tools and wear gloves to protect surface finishes and edges during handling.
Shree Metals delivers a wide range of aluminium alloys engineered for strength, formability, and performance. Whether you need marine-grade plates, aerospace-certified bars, or architectural profiles, our alloys are backed by strict quality control and tailored to your specifications. Choose us for reliable sourcing, precision processing, and sustainable alloy solutions.